Sewing Embroidery Patterns - Brother 882-W01 Operation Manual

PRINT AND STITCH (COMBINING EMBROIDERY PATTERNS AND PRINTED DESIGNS)
d
If an iron-on transfer sheet is used, transfer
the image onto fabric.
Memo
• For details on transferring from iron-on
transfer sheets, refer to the instructions for
the iron-on transfer sheets.
• If necessary, cut the iron-on transfer sheet
to the size of the pattern before transferring
the image.

Sewing Embroidery Patterns

a
Hoop in the embroidery frame the fabric
with the background image ironed on.
b
Cut the paper printed with the center
positioning image
positioned aligned with the background
image on the fabric.
* Lines or color changes in the image can help you
find the correct alignment position.
222
so it can easily be
c
Place the paper printed with the positioning
image on top of the fabric so that the
pattern is aligned, and then affix the paper
to the fabric with cellophane tape to
prevent the paper from moving.
a Cellophane tape
d
After checking that a pattern is selected,
press .
o The sewing screen appears.
Note
• Before embroidering, check that the
embroidery position sheet is perfectly
aligned with the background.
e
Align the embroidering position according
b
to steps through
In Camera to Align the Embroidering
Position" on page 206.
f
Remove the positioning sheet and press the
"Start/Stop" button to begin embroidering.
CAUTION
• Before pressing the "Start/Stop" button to
begin embroidering, remove the positioning
sheet taped to the fabric in step
f
of "Using the Built-
c c
.