Creating An Appliqué Piece - Brother 882-W01 Operation Manual

VARIOUS EMBROIDERING FUNCTIONS
c
Press to return to the previous
screen.
d
Press
e
Press to select the basting setting.
Note
• When
to the center. After selecting the basting
setting, move the pattern to the desired
position.
Memo
• To cancel the setting, press
• If no pattern is selected, the key appears
gray and cannot be selected.
o Basting is added to the beginning of the sewing
order.
296
.
is pressed, the pattern is moved
.
f
Press the "Start/Stop" button to begin
embroidering.
g
When embroidering is finished, remove the
basting stitching.
Creating an Appliqué Piece
Appliqué pieces can be created from the built-in
patterns and patterns on embroidery cards. This is
convenient for fabrics that cannot be embroidered
or when you wish to attach an appliqué to a
garment.
■ Creating an Appliqué Piece
The following pattern will be used to create an
appliqué piece.
Note
• Felt or denim fabrics are recommended to
make the appliqué piece. Depending on the
pattern and fabric used, lighter weight fab-
rics may cause the stitching to appear
smaller.
• For best results, be sure to use stabilizer
material for embroidering.
• Select a frame that matches the pattern
size. Frame options are displayed on the
LCD screen.
• When making appliqué pieces, do not use
the border embroidery frame. Depending on
the pattern density and fabric used, shrink-
age of the stitching may occur.