Upgrading Your Machine's Software; Upgrade Procedure Using Usb Media - Brother 882-W01 Operation Manual

UPGRADING YOUR MACHINE'S SOFTWARE

UPGRADING YOUR MACHINE'S SOFTWARE

You can use USB media or a computer to download software upgrades for your sewing machine.
When an upgrade program is available on "http://solutions.brother.com", please download the files
following the instructions on the website and steps below.
Note
• When using USB media to upgrade the software, check that no data other than the upgrade file is
saved on the USB media being used before starting to upgrade.
Upgrade Procedure Using USB
Media
a
While pressing the "Automatic Threading"
button, turn the main power to ON.
→ The following screen will appear on the LCD.
b
Press
344
.
c
Insert the USB media into the primary (top)
USB port on the machine. The media device
should only contain the upgrade file.
a Primary (top) USB port for media
b USB media
Note
• The access lamp will begin blinking after
inserting USB media, and it will take about 5
to 6 seconds to recognize the media. (Time
will differ depending on the USB media).