Duplicating A Pattern - Brother 882-W01 Operation Manual

Using the Built-In Camera to
Align the Embroidering Position
The embroidering position can easily be aligned
by using the machine's built-in camera and the
enclosed embroidery positioning sticker.
See "Using the Built-In Camera to Align the
Embroidering Position" on page 206 and 302.
Uninterrupted Embroidering
(Using a Single Color)
You can embroider a multi-color pattern with a single
color without stopping the machine while
embroidering.
See "Uninterrupted Embroidering (Using a Single
Color)" on page 295.

Duplicating a Pattern

You can duplicate a desired pattern with one touch.
See "Duplicating a Pattern" on page 290.
Print and Stitch (Combining the
Embroidery and Printing)
Completed embroidery patterns can be combined
with printed backgrounds that are built into this
machine.
Beautiful three-dimensional embroidered designs
can be created by ironing a background onto
fabric or printing it onto printable fabric, and then
embroider a design to compliment the
background.
See "PRINT AND STITCH (COMBINING
EMBROIDERY PATTERNS AND PRINTED
DESIGNS)" on page 217 and 306.
Note
• Print the background and embroidery
position sheet in their original dimensions. If
an image is printed in a different size, the
sizes of the embroidery pattern and
background may not match. In addition, the
built-in camera cannot detect the
embroidery position mark. Make sure that
the print settings are correctly specified.
vii