Creating A Horizontal Mirror Image; Sewing A Pattern Continuously; Changing Thread Density (For Satin Stitch Patterns Only) - Brother 882-W01 Operation Manual

EDITING STITCH PATTERNS
Creating a Horizontal Mirror
Image
To create a horizontal mirror image, select a stitch
pattern then press

Sewing a Pattern Continuously

Press to select continuous sewing or single
stitch sewing.
Memo
• To finish a complete motif while sewing the
pattern continuously, you can press the
key while sewing. The machine will
automatically stop when the motif is finished.
158
.
Changing Thread Density
(for Satin Stitch Patterns Only)
After selecting a satin stitch pattern, press
select your preferred thread density.
CAUTION
• If the stitches bunch when thread density is
changed to , return the thread density to
. If you continue sewing when the stitches
are bunched, the needle may bend or break.
Memo
• Even if you select a new pattern after chang-
ing the thread density, the thread density
remains the same until you change it.
• You cannot change thread density for a
combined pattern after additional patterns
are added.
to