Table of Contents
Advertisement
8. Attach an Outer Arm Cover (67) and the Inner
Arm Cover (68) around the Right Upper Body
Leg (60) with two M4 x 16mm Screws (104).
Repeat this step for the other side of the
elliptical.
9. Apply a small amount of grease to the axle on
the Right Upper Body Leg (60) and to a 19mm
Wave Washer (66).
Identify the Right Pedal Arm (58), which is
marked with a "Right" sticker, and orient it as
shown.
Slide the 19mm Wave Washer (66) and the
Right Pedal Arm (58) onto the Right Upper
Body Leg (60).
Attach the Right Pedal Arm (58) with an M8 x
19mm Patch Screw (82), an Axle Cover (53),
and an M8 x 25mm Washer (98); to avoid
breaking the Axle Cover, do not overtighten
the Patch Screw.
Repeat this step for the Left Pedal Arm (not
shown).
8
104
9
9
104
60
67
68
Grease
60
66
98 53
82
58
Advertisement
Table of Contents
