How To Use The Elliptical - ICON PROFORM 505 ZLE User Manual

HOW TO USE THE ELLIPTICAL

HOW TO PLUG IN THE POWER ADAPTER
IMPORTANT: If the elliptical has been exposed to
cold temperatures, allow it to warm to room tem-
perature before plugging in the power adapter. If
you do not do this, you may damage the console
displays or other electronic components.
Plug the power
adapter into the
receptacle on the
frame of the ellipti-
cal. Next, plug the
power adapter into
the plug adapter.
Then, plug the
plug adapter into
an appropriate
outlet that is prop-
erly installed in accordance with all local codes and
ordinances.
Plug
Adapter
Power Adapter
HOW TO MOVE THE ELLIPTICAL
Due to the size and weight of the elliptical, moving
it requires two persons. Stand in front of the ellipti-
cal, hold the upright, and place one foot against one of
the front wheels. Pull on the upright and have a sec-
ond person lift the handle on the ramp until the
elliptical will roll on the front wheels. Carefully move
the elliptical to the desired location, and then lower it
to the floor.
13
Pull on
the upright
Place
your foot
here
Lift here