Advanced Configuration; Connection To The Pc - Bticino Switchboard Installer Manual

Switchboard

5 Advanced configuration

As an alternative to the menu setup, it is also possible to configure the switchboard from the PC,
using the TiSwitchBoardDevice software found in the CD supplied.
WARNING
Some functions, like the creation of the directories and the management of the bells, can only be
performed using the software.
5.1

Connection to the PC

To transfer the configuration performed using the TiSwitchBoardDevice software, or to update the
Firmware, connect the switchboard to the PC using an USB/miniUSB cable.
To enable communication the switchboard must be powered.
25