Table of Contents
Advertisement
Registering
A process by which you place fax or telephone numbers and names in
the MultiPASS's memory for automatic dialing so that you can save time
dialing frequently called destinations. You register numbers using the
Address Book in the MultiPASS Desktop Manager.
Regular dialing
Pressing the individual numeric buttons to dial a fax or telephone
number.
Remote receiving ID
A two-digit code that enables you to manually activate a fax using a
telephone that is connected to the MultiPASS. (The default code is 25.)
Remote reception
Activating a fax by answering a telephone that is connected to the
MultiPASS, but that is not located near the unit (such as a cordless
phone). You need to dial a remote receiving ID number to start remote
reception.
Resolution
The measurement of a printer's quality expressed in dots per inch (dpi).
Low resolution causes font characters and graphics to have a jagged
appearance. Higher resolution means smoother curves and angles as
well as a better match to traditional typeface designs. Resolution values
are represented by horizontal data and vertical data, for example,
360
360 dpi.
Rotary pulse
A telephone dialing system where a dial is rotated to send pulses to
the telephone switching system. When you pulse dial, you hear clicks.
When you touch-tone dial, the most common dialing system, you
hear tones.
RX
See Receiving.
Sender ID
Information printed at the top of a fax (also called TTI or Transmit
Terminal ID). This data appears only if the sending fax has been
programmed with the information.
Sending
Sending transmission is also defined as TX or transmit. A fax document
that has been scanned by a fax machine and sent over telephone lines, in
the form of electrical pulses, to another fax machine is a sending
transmission. The MultiPASS also allows you to send a document
directly from your computer (PC faxing).
Glossary
G-8
Advertisement
Table of Contents
