Table of Contents
Advertisement
Option
COLOR COPY MEDIA
RX MODE
FILE PRINT
ROLLER CLEANING
HEAD CLEANING
NOZZLE CHECK
N
You can change the TX REPORT settings only through the MultiPASS
Desktop Manager.
Entering Information in the MultiPASS
When using the MultiPASS as a stand-alone fax machine, you must enter
your user information into the unit through the operator panel.
When entering information through the operator panel of the
MultiPASS, follow these guidelines.
If you pause and do not make an entry for more than 60 seconds,
the MultiPASS returns to Standby mode. You must start the
procedure over from the beginning.
If you make a mistake while entering registration information, you
can correct it in one of two ways:
•
Press < or > to move the cursor under the wrong character, and
then enter the correct character.
•
Press
B-2
Using the MultiPASS C5500 as a Stand-alone Fax
Description/Settings
Select PLAIN PAPER when printing or copying
on plain paper, or HIGH RES. PAPER for
special print media, such as Canon's High
Resolution Paper HR-101.
Sets the Receive Mode.
Prints documents stored in the MultiPASS's
memory (when the MultiPASS Desktop
Manager is installed).
Cleans the rollers inside the MultiPASS.
Cleans the print head on the BJ cartridge.
Prints a test pattern to check whether the
BJ cartridge is functioning normally.
and reenter the information.
STOP
Appendix B
Advertisement
Table of Contents
