Table of Contents
Advertisement
Printer Setup Within Windows
You can use the MultiPASS with all your Windows 98 and Windows 95
applications. Be sure to set the MultiPASS as the default printer for all
your Windows operations.
Most of your printing operations are controlled by your software
application. The following sections describe how you set certain options
directly from the printer driver; you only need this information if your
application does not control printing.
Opening the Printer Properties Dialog Box
in Windows 98/95
You can open the Properties dialog box in one of the following ways:
From within any Windows application, you can select the Print or
Print Setup command.
From the Printers folder, you can select the printer and then select
the Properties command from the File menu.
From the Printers folder, you can select the printer, click the right
mouse button, and then select Properties from the drop down list.
Using the Printer Driver in Windows 98/95
The printing options are displayed on these Windows 98/95 tabs:
General, Details, Paper, Graphics, and Setting. See Using the Windows
Tabs on the next page for details.
N
For detailed information on any of the printing options, you can use the
Windows 98/95 online Help in the following ways:
Use the right mouse button to click an item on the screen; then
click the What's This? command.
Click the question mark ? in the upper right corner and then click
an item.
Press
F1
Chapter 2
.
Printing With the MultiPASS C5500
2-7
Advertisement
Table of Contents
