Hardware And Software Requirements - Canon MultiPASS C5500 Quick Start Manual

Hardware and Software Requirements

Important!
(These are the minimum requirements.)
IBM
(Pentium
Microsoft
or Windows NT)
16 megabytes (MB) of RAM (32 MB recommended)
50 MB of available hard disk space
Bi-directional, Centronics
a cable less than 6.6 feet in length is recommended.
CD ROM drive (2X or better) (If you do not have a CD ROM drive, you can call
the Canon Computer Systems, Inc. Customer Care Center to order the MultiPASS
Desktop Manager and Printer Driver on diskettes.)
These configurations are required by the MultiPASS Printer Driver,
MultiPASS Desktop Manager for Windows, and ScanGear for MultiPASS.
Canon Creative Pro has additional requirements. See the Canon Creative Pro
booklet for details.
Unpack the MultiPASS C5500
1
Carefully remove
Remove the items from the documentation packages.
all items from
Remove these hardware items from the top tray:
the box.
Lift out the MultiPASS unit.
Always lift the unit from
the bottom.
Important!
shipping materials. You may
need them later if you have to
transport the printer.
2
Before you start, make sure you have the following computer setup.
® PC or compatible computer with a 486DX2 66 MHz or higher processor
® processor recommended)
® Windows ® 98 or Windows 95 (not compatible with Windows 3.1
® -compatible parallel cable (IEEE 1284-compliant);
SENDING DOCUMENT
SUPPORT
DOCUMENT GUIDE FOR
SCANNED DOCUMENTS
BC-21e COLOR BJ
CARTRIDGE
Save the box and
CANON MPC-5500/QSG, Page 2 - File: 55-QSP2.eps
W. Swanlund
TELEPHONE
LINE
EXTRA BCI-21 SB-21 BJ CARTRIDGE
BLACK BJ TANK
CORREX2> August 15 '98
POWER
CORD
OUTPUT TRAY
EXTENSION
STORAGE BOX