Using The Multipass Desktop Manager Software; Hardware And Software Requirements - Canon MP-C545 User Manual

The multitasking ability of your MultiPASS enables you to perform a number of
operations simultaneously. For example, you can print, scan a document, or make
copies at the same time you are sending or receiving a fax.
The compact size of the MultiPASS makes it ideal for desktop use, and lets you use
it in places where other machines might not fit.

Using the MultiPASS Desktop Manager Software

Canon's MultiPASS Desktop Manager software package allows you to use or
configure the printing, faxing, scanning, and telephone functions of your
MultiPASS directly from your computer.
For more details on using your MultiPASS with the MultiPASS Desktop Manager
software, refer to the MultiPASS Desktop Manager Software Guide. This manual is
in Adobe® Acrobat® PDF format on your MultiPASS C545 Installer CD. You can
open the Software Guide from your CD or from the MultiPASS Desktop Manager
folder on your hard disk. If you do not have Adobe Acrobat loaded, simply follow
the instructions to load it on your system.

Hardware and Software Requirements

Before you start, make sure you have the following computer setup. These are the
minimum requirements.
Power PC™, iMac, G3 or G4 USB enabled
System 8.5 or later
32MB of RAM (64MB recommended)
75MB of available hard disk space; 150 MB recommended
CD-ROM drive (2x or better)
Color monitor with 256 or more colors and 800 x 600 pixel display
USB-to-Parallel cable (included)
Chapter 1 Introduction
1-3