Table of Contents
Advertisement
Installation Guide
Base Station
Fatal error
DIP Switches
The DIP switches can be found on the back of the BS3x2, see
NOTE: Note: DIP switch 3 and 4 shall be set to ON.
Set DIP switch 1 and 2 to ON or OFF as follows:
DIP switch 1: ON
DIP switch 2: ON
DIP switch 1: OFF
DIP switch 2: ON
DIP switch 1: ON
DIP switch 2: OFF
DIP switch 1: OFF
DIP switch 2: OFF
2.4.2 BS342 WITH EXTERNAL ANTENNAS
This section contains the differences between the BS3x2 with internal antenna and
external antennas. For all other information see
page 11.
Figure 6. BS342 with MCX connectors for external antennas.
Contents of the Box
The box in which the BS342 is packed contains:
•
A BS342 with external antennas.
•
A mounting bracket
•
An antenna bracket
•
Two antenna coaxial cables.
•
Two antennas.
•
Four screws with wall plugs
32/1531-ANF 901 43 Uen B2 2016-04-01
Solid red.
1880-1900 MHz (Europe, Africa, Middle East, Australia, New
Zealand and most of the countries in Asia)
1900-1920 MHz
1910-1930 MHz (Latin America)
1920-1930 MHz (North America)
Back view while lying down
MCX connectors
Fatal hardware error.
figure 5
2.4.1 BS3x2 with Internal Antenna
on page 11.
on
13
Advertisement
Table of Contents
