Table of Contents
Advertisement
Installation Guide
Base Station
Front view
Figure 4. BS3x0 Overview
Contents of the Box
The box in which the base station is packed contains:
•
A base station
•
Two antennas (only base station with external antenna)
•
A mounting bracket
•
Two screws with wall plugs
Power Distribution
The base station can be powered using the following methods:
•
From the PBX via the Express Powering Pair (EPP) and data pairs
•
With a local AC-adapter
NOTE: For more information about power distribution, see
on page 22.
Software
The software in the BS3x0 can be updated by downloading new software without
disconnecting the equipment. The new software is stored in flash memory. For
information on how to update the software in the BS3x0, see the applicable Installation
and Operation Manual for the BS3x0.
32/1531-ANF 901 43 Uen B2 2016-04-01
LED2
LED1
Back view
Test
Data/Power
(RJ45)
(RJ12)
3.3 Power the Base Station
Data/Power
(RJ45)
9
Advertisement
Table of Contents
