Table of Contents
Advertisement
Installation Guide
Base Station
Figure 9. Minimum distances between a cable duct and the mounting bracket.
3.2.5 CONNECT EXTERNAL ANTENNAS (ONLY IPBS4X2 AND BS3X2)
1
Position the included antenna bracket above the mounting bracket with a
minimum distance of 74 mm (250 mm maximum) and mark the two holes for the
antenna bracket, see
2
When using wall plugs: Drill the two holes using a
included wall plugs.
3
Position the antenna bracket to the wall and fasten it with the two included
4
Mount the two included coaxial cables on the antenna bracket
19 (2). Fasten the coaxial cables with the lock nuts which are found on the
coaxial cable antenna connectors.
5
Mount the antennas on the antenna connectors (2).
32/1531-ANF 901 43 Uen B2 2016-04-01
57 mm
75 mm
15 mm thick cable ducts
figure 10
3.5 mm screws.
65 mm
TOP
125 mm
70 mm
on page 19 (1).
6 mm drill and insert the
figure 10
on page
18
Advertisement
Table of Contents
