Husqvarna K970 III Workshop Manual page 16

the carburetor inlet. Removal of waste is best
done with a vacuum cleaner.
1. Remove the 4 screws and remove the air filter
cover.
2. Clean around the area with a vacuum cleaner.
3. Loosen the center screw. Remove the air filter.
CAUTION: Make sure that dust does not fall
into the carburetor inlet.
16 - Product overview for repair
and servicing
5.2.4 To remove the cylinder cover
1. Remove the air filter. Refer to
on page 15 .
2. Remove the 2 screws and the cylinder cover.
5.2.5 To remove the carburetor
1. Remove the cylinder cover. Refer to
cylinder cover on page 16 .
2. Remove the choke handle.
To remove the air filter
To remove the
1444 - 001 - 02.04.2020