116
Users Manual
Maintenance
Maintenance of the Meter consists of battery replacement and case cleaning.
Replacing the Battery
To prevent shock, injury, or damage to the Meter, remove test leads from the
Meter before opening the case or battery door.
See
Figure 1
for disassembly.
To remove the battery door for battery replacement:
1. Remove the test leads from the Meter.
2. Remove the battery door screw.
3. Use the finger recess to lift the door slightly.
4. Lift the door straight up to separate it from the case.
5. The battery fits inside the battery door, which is then inserted into the case, bottom edge
first, until it is fully seated. Do not attempt to install the battery directly into the case.
6. Install and tighten battery door screw.
Cleaning
Wipe the case with a damp cloth and mild detergent. Dirt or moisture in the terminals can affect
readings.
14
XW Warning
Figure 1. Disassembly