Nominal Size Selection - Yoshitake GD-26 Series Product Manual

Caution

2.2 Nominal size selection

Procedure of nominal size selection
1. If the pressure difference before and after the product is 0.15 MPa or more, choose the nominal size
from the rated flow table below.
Rated flow table (The pressure difference before and after the product is 0.15 MPa or more)
Nominal size
Rated flow (L/min)
2. If the pressure difference before and after the product is less than 0.15 MPa, choose the nominal
size from the nominal size selection charts (for 15A - 50A, 65A - 100A, and 125A - 150A) below.
Nominal size selection chart
Nominal size 15A - 50A
Nominal size
Please confirm that the indications on the product correspond with the specifications
of the ordered product model before use.
* If they are different, please contact us without using the product.
15A 20A 25A
30 40 60
32A 40A 50A
100 150 250
Inlet pressure
Flow rate L/min
3
65A 80A 100A 125A 150A
300 450 700
1.0 - 1.6 MP
Reduced pressure + 0.2 MPa
Reduced pressure + 0.1 MPa
Reduced pressure + 0.05 MPa
1600 1800
a
PDT-008o