Removing The Mulching Plug - Makita LM001C Instruction Manual

3. Align the hole in the lower handle with the hole in
the upper handle, then insert the bolt from inside, and
then tighten the nut from outside with box wrench 13.
Perform the same procedure on the other side.
5
4
3
► 1 . Bolt 2. Lower handle 3. Nut 4. Hole 5. Upper
handle
CAUTION:
Hold the upper handle firmly so
that it does not drop off your hand. Otherwise, the
handle may fall and cause an injury.
4. Attach the holders to the handle.
Align the protrusions on the holder with the holes on the
handle so that the protrusions fit in the holes. Position
the cords as shown in the figure.
► 1 . Cord 2. Holder
1
1

Removing the mulching plug

1. Open the rear cover.
2
► 1 . Rear cover
2. Remove the mulching plug while holding down the
lever.
► 1 . Lever 2. Mulching plug
Assembling the grass basket
1. Insert the frame into the grass basket as far as it
2
will go.
1
► 1 . Frame 2. Grass basket
7 ENGLISH
1
1
2
2