Removing The Mulching Plug - Makita XML13 Instruction Manual

2. Turn the knob 90° while pulling the knob on the
lower handle to release the locking pin. Perform the
same procedure on the other side. Raise the handle,
and then turn the knob on both sides 90°. Make sure
that the knobs are securely fixed.
Fig.3
► 1. Knob
NOTE: Supporting the handle makes it easier to
release the locking pin when pulling the knob.

Removing the mulching plug

1. Open the rear cover.
Fig.4
► 1. Rear cover
1
1
7 ENGLISH
2. Lift up the mulching plug slightly, and then remove
it.
Fig.5
► 1. Mulching plug
Assembling the grass basket
1. Pick up the upper clip of the grass basket.
1
Fig.6
► 1. Upper clip
2. Insert the frame into the grass basket as far as it
will go while holding the handle of the frame.
1
Fig.7
► 1. Handle
NOTICE:
Do not insert the handle into the grass
basket. Be sure to insert the frame along the stitch of
the grass basket.
1