Troubleshooting; Optional Accessories - Makita LM001C Instruction Manual

NOTICE:
When tightening the nuts to install the
individual mower blades, apply 30 N•m as tighten-
ing torque.
NOTICE:
When installing the individual mower
blade, be sure to attach the spring washer in the
direction as shown in the figure.
NOTICE:
When installing the individual mower
blade, be sure to insert the bolts into the bolt
holes shown in the figure.

TROUBLESHOOTING

Before asking for repairs, conduct your own inspection first. If you find a problem that is not explained in the manual, do not attempt
to disassemble the machine. Instead, ask Makita Authorized Service Centers, always using Makita replacement parts for repairs.
State of abnormality
Mower does not start.
Motor stops running after a little use.
Motor does not reach maximum
RPM.
Mower blade does not rotate:
stop the mower immediately!
Abnormal vibration:
stop the mower immediately!

OPTIONAL ACCESSORIES

CAUTION:
These accessories or attachments are
recommended for use with your Makita machine spec-
ified in this manual. The use of any other accessories or
attachments might present a risk of injury to persons. Only
use accessory or attachment for its stated purpose.
If you need any assistance for more details regarding
these accessories, ask your local Makita Service Center.
• Mower blade
• Makita genuine battery and charger
NOTE: Some items in the list may be included in the
product package as standard accessories. They may
differ from country to country.
Probable cause (malfunction)
Battery is not installed.
Battery problem (under voltage)
The lock key is not inserted.
Battery's charge level is low.
Cutting height is too low.
Cut grass is clogged in the mower.
Battery is installed improperly.
Battery power is dropping.
The drive system does not work correctly.
Foreign object such as a branch is
jammed near the blade.
The drive system does not work correctly.
Blade is imbalanced, excessively or
unevenly worn.
19 ENGLISH
Installing the mower blade
WARNING:
Install the mower blade carefully.
It has a top/bottom facing.
WARNING:
Tighten the bolt clockwise firmly
to secure the blade.
WARNING:
Make sure that the mower blade and all
the fixing parts are installed correctly and tightened securely.
WARNING:
When you replace the blades, always
follow the instructions provided in this manual.
NOTICE:
After installing the mower blades,
remove the pin from the mower body.
To install the mower blades, perform the removal proce-
dure in reverse.
Remedy
Install charged battery.
Recharge the battery. If recharging is not effective,
replace battery.
Insert the lock key.
Recharge the battery. If recharging is not effective,
replace battery.
Increase the cutting height.
Remove the clogged grass from the mower.
Install the battery as described in this manual.
Recharge the battery. If recharging is not effective,
replace battery.
Ask your local authorized service center for repair.
Remove the foreign object.
Ask your local authorized service center for repair.
Replace the blade.