Makita LM001C Instruction Manual page 10

2. Install the portable power pack to the machine as
shown in the figure.
1
► 1 . Battery support lever 2. Portable power pack
3. Lock button
CAUTION:
Make sure that the portable power
pack is securely locked to the battery support
levers and the lock button is securely locked.
3. Attach the cord to the cord holders as shown in
the figure. Open the plug cover, then align the arrow
mark on the socket with that on the machine, and then
insert the socket into the plug all the way.
► 1 . Plug cover 2. Arrow mark 3. Socket 4. Cord
2
3
1
2
3
NOTICE:
the socket cannot be inserted easily, it is not being
inserted correctly.
NOTICE:
the plug, do not hold the cord but hold the socket.
Otherwise, the cord may be damaged and cause a
malfunction of the machine.
4. Open the lock key cover, then insert the lock key
in the place shown in the figure as far as it will go, and
then close the lock key cover.
2
► 1 . Lock key 2. Lock key cover
To remove the portable power pack, perform the instal-
lation procedure in reverse.
For PDC01
NOTE: Before installing the portable power pack to
the machine, install at least one battery to battery port
1 or 2, and at least one battery to battery port 3 or 4.
1. Place the cord of the portable power pack as
shown in the figure.
4
► 1 . Portable power pack 2. Cord
10 ENGLISH
Do not insert the socket forcibly. If
When disconnecting the socket from
1
1
2