Searching And Reviewing While Recording - Canon Vistura User Manual

Searching and Reviewing While Recording

Record search
E
When the camera is in record pause
mode, you can use record search to
play the tape forwards or backwards to
find the point where you want to start
or restart recording. This is useful when
you want to add a new scene to a
previously used cassette. By using
record search, you can ensure a smooth,
noise-free join between the new scene
and the old one.
1. Make sure the camera is in record pause mode.
• PAUSE appears in the display (see p. 12).
2. Press and hold the REC SEARCH + or – button while you check
the picture in the display.
• The + button plays the recording forwards and the – button plays it
backwards.
3. Release the button when you find the point where you want to start
recording.
• The camera returns to record pause mode.
Record review
When the camera is in record pause mode, you can use record review to play back
the last few seconds of your recording and then return automatically to record
pause mode. You can quickly make sure that a scene has recorded properly and
then go on to shoot the next scene, without producing any noise in the picture.
1. Make sure the camera is in record pause mode.
2. Press and release the c (record review) button while you check the
picture in the display.
• The camera rewinds the tape, plays back the last few seconds, and returns to
record pause mode.
Note:
• Noise (mosaic like noise) may appear on the screen during record search and
record review.
38
REC SEARCH