Canon Vistura User Manual page 21

Note:
E • If you are going to use the TV as a monitor while you are shooting, remember
to keep the TV volume turned down as long as the camera's audio terminals are
connected. If the sound from the TV speakers is picked up by the microphone,
an unpleasant high-pitched squeal, called feedback, may be produced.
If your TV is already hooked up to a VCR, you can connect the camera to the
VCR instead of the TV. Follow the instructions on the previous page.
If your TV does not have audio/video terminals
TV with coaxial antenna cable
TV with flat twin-lead antenna cable
To connect the camera directly to a TV which does not have audio/video
terminals, you will need to use the optional RU-100 RF Unit together with the
optional RC-150 RF adapter cables.
22
DV
IN/OUT
AV S
OUT
RC-150 RF
DC.IN 9.5V
Adapter Cables
RU-100 RF Unit
DV
IN/OUT
AV S
OUT
RC-150 RF
DC.IN 9.5V
Adapter Cables
RU-100 RF Unit
4CH 3CH
TO TV FROM ANT
1
3
Coaxial cable with F-connection
4CH 3CH
TO TV FROM ANT
1
300-75 ohm
adapter
Coaxial cable
3
with F-connection
75-300 ohm adapter
2
VHF
2
VHF