Canon Vistura User Manual page 30

Turning off the wireless controller
The wireless controller can be turned off to prevent inference from other Canon
wireless controllers being used nearby.
WIRELESS C.•OFF
(see p. 27)
1. Open either the camera, VCR or set up menu, and point the arrow
at WIRELESS C.
2. Select the OFF setting and close the menu.
• C | appears in the display.
Turning off the tally lamp
The tally lamp lets you know that the
camera is recording. However, its
flashing may be reflected into the lens
during close-up recording, or when
recording through glass.
You may therefore decide to turn it off.
TALLY LAMP••OFF
(see p. 27)
1. Open the camera menu, and point the arrow at TALLY LAMP.
2. Select the OFF setting and close the menu.
• The tally lamp no longer flashes during recording, but it will still light up
when the camera receives a signal from the wireless controller.
E
31