Basic Recording - Canon Vistura User Manual

Basic Recording

E
Before you start recording
Have you completed the following steps?
• Attached a power source (p. 8).
• Loaded a cassette (p. 10).
• Removed the lens cap and fastened the grip belt (p. 72).
• Chosen the display: viewfinder or LCD screen (p. 16)
• Adjusted the viewfinder (as applicable, p. 72).
You may also want to install the backup battery (p. 74) in order to set the date and
time display (p. 32).
To record
1. Press down and slide the POWER switch to [.
• The camera power indicator lights up red.
• This selects the camera's Easy Recording program. It allows you to simply
point and shoot without making any manual adjustments (see p. 40).
2. Turn the standby lever to MOVIE.
• PAUSE appears in the display — the camera is now in "record pause
mode."
• The camera will turn itself off if you leave it in record pause mode for more
than about five minutes. To return to record pause mode, turn the standby
lever to LOCK and back again, or set the POWER switch to OFF and then
back to [.
3. Press the start/stop button to begin recording.
• The tally lamp flashes rapidly and REC appears in the display.
• It is convenient to use the start/stop button on the front cover when you
shoot low angle recorndings.
12
1
P
POWER
OFF
VCR
2 3
PHOTO
MOVIE LOCK
PHOTO
MOVIE LOCK