Setting The Clock - Canon Vistura User Manual

Setting the clock

E
1. Set the camera to record pause mode.
• PAUSE appears in the display (see p. 12).
2. Open the menu and select D/TIME SET.
• The year display starts to flash.
3. Turn the command dial to change the year. Press the execute
button to move to another part of the display.
• Once you move from the year, the next part of the display starts flashing.
4. Set the month, day, hour, and minute in the same way.
5. Press the MENU button when finished, and the clock starts.
• The date can be set to any year between 1998 and 2020.
• If you press the MENU button in the middle of setting the date and time the
seconds are set to zero, you leave the menu, and the clock starts.
• If you press the execute button after setting the minutes you can set the date and
time again from the start.
Setting the display style
(see p. 27)
1. Press down and slide the POWER switch to VCR.
2. Open the VCR menu and select D/TIME SEL.
3. Choose between DATE, TIME and DATE & TIME.
4. Press the MENU button to close the menu.
34
D/TIME SEL.•DATE & TIME