Canon Vistura User Manual page 60

RECORDER
The camera's Auto Editing Function can remotely control almost all brands
and models of VCR. VCR remote control signals vary depending on model
and brand. First, choose the right RECORDER setting for your VCR. The
number indicates the VCR brand. The letter indicates the set of signals.
Brand Settings
Canon 1-A to 1-B
Aiwa 2-A to 2-C
Akai 3-A to 3-C
Fujitsu 4
Funai 5
Hitachi 6-A to 6-B
JVC 7-A to 7-C
Mitsubishi 8-A to 8-D
NEC 9-A to 9-D
Panasonic 10-A to10-G
Blaupunkt
Quasar
Notes:
• If your brand of VCR is not on the chart, or you cannot find the correct setting,
try all the numbers by pressing the execute button until the VCR starts to record.
• Once you find the correct setting, remember this and do not change it unless you
change VCR.
• See p. 65 for details of the "cut-in" and "cut-out" adjustments.
• If you try all the numbers and letters, but the VCR has still not started to record:
• Check the VCR is ready to record, and on pause.
• Check the VCR can receive signals from where the camera is, and that nothing
is blocking the signals.
• Go back and try to set it again.
• It is unlikely, but you may have a VCR the Auto Editing Function cannot
control. If so use the Simple Editing method on p. 69.
Brand Settings
Pioneer 11
Sanyo 12-A to12-C
Fisher
Sharp 13-A to 13-C
Sony 14-A to 14-F
Toshiba 15-A to 15-B
GE 16-A to 16-B
RCA
Magnavox 17-A to 17-B
Philips 18-A to 18-C
Seleco
Rex
Brand Settings
Thomson 18-A to 18-C
Saba
Nordmende
Ferguson 19-A to 19-C
Grundig 20-A to 20-C
Nokia 21-A to 21-C
Telefunken 22-A to 22-B
Zenith 23
Samsung 24-A to 24-B
GoldStar 25
as of Aug 1998
E
61