Notes On Using The Batteries - Canon Vistura User Manual

Notes on Using the Batteries

Charging and recording times
• These times vary — the safest policy is always to have two or three times as
many battery packs as you think you will need.
• You will get more recording time if you turn the camera off between shots,
instead of leaving it in record pause mode.
Battery pack
Time needed for full recharge
Maximum recording time
• Recording time will be shorter than usual at low temperatures. You can use the
battery pack between 32° and 104°F (0° to 40°C), but it works best between
50° and 86°F (10° to 30°C).
• If the battery pack starts to give you much less recording time than usual, it has
reached the end of its life and must be replaced.
How much power is left?
The indicator in the display shows you
approximately how much charge the battery pack
has left:
Notes:
• "CHANGE THE BATTERY PACK " appears in
the display for 4 seconds when the power is
completely exhausted. The empty battery mark
then appears and starts to flash. The power
indicator light also flashes.
• The indicator is not constant — different levels
will be shown when you subject the battery pack
and camcorder to different conditions.
When to recharge
You can recharge a lithium ion battery pack whenever it is convenient. Unlike a
conventional battery pack, it does not have to be fully discharged first. However,
as the battery pack will naturally discharge itself over time, it is best to charge it
the same day you plan to use it, or the day before.
BP-915
2 hr. 40 mins
Using the viewfinder:
Using the LCD screen:
1 hr. 35 mins
1 hr. 20 mins
100%
75%
50%
25%
CHANGE THE BATTERY PACK
E
0%
73