Change Of Language - PRITY PLW11 Technical Description And Operation Instructions

5.3.2. Change of language

"MENU" →
" " → "Език" → " " → "English/Bulgarian"
5.3.3. Modes of operation
Using the "START/STOP" button you can enter this submenu where you're provided with
the opportunity for adjustment of five settings:
- Adjustment of air → start/stop → option for adjustment of the air via "
in +/- in respect to the factory settings.
Adjustment of pellets → start/stop → option for adjustment of the pellets via "
-
buttons in +/- in respect to the factory settings;
- Limit of power (output) → start/stop → using "
required stage of power → confirming with start/stop. It is desirable to select average
stages of power, which are also the most efficient. Please use the topmost, fifth stage
only for extremely low outdoor temperatures. In warm weather the stove will
automatically switch to a lower stage.
- Temperatures → start/stop – option for adjustment of the temperature in the WHS
(boiler) between 50°С and 85°С or in DHW, as well as of the limits of the temperature
fluctuations in relation to the pre-set values (hysteresis). See illustration with the
diagram below. The temperature schedule specified below is classical and universal. It
is also used by the centralised heat supply system
PRITY PELLET STOVE
" " → Password: 1111 → " " →
Clock/Timer
Alarms
→ " " → "Настройка" →
" button you can select the
.
Select the temperature of the water
for heating in accordance with the
Use normally low stages of power.
With very low outdoor temperatures
select higher power stage - 4 or 5.
- 38 -
" buttons
outdoor temperatures.
"