STATUS
5.3. Description of the control panel with the display
The display is used for user-friendly visualisation and setting up of the parameters.
Its capacity is divided into three access levels – user, service and installer, with the access
to the second and third one being password protected. Control is implemented by four
buttons.
"MENU" (BACK) when pressed in the main screen it loads the controller menu, and
when working within the menu structure, it brings you one level up without
confirmation.
"ENTER"
- Pressing and holding for more than 3 sec. - starts or stops the appliance (ignition and
putting out).
- Single press - confirms the selected function or value when working with the menu.
Using buttons "
5.3.1. Main screen
Description of the display menu.
Using "MENU" button brings you to "Main menu" where you can access the following
sections, selectable via the "
PRITY PELLET STOVE
PROCESSOR
TIME
TIMER
PUMP
(Start/Stop) button has double functionality:
" you can select a submenu and set values to the parameters.
" buttons:
DATE
TIME
ALARM
Operation mode
Current values
Manual mode
Settings
- 37 -
WATER
TEMPERATURE
PRE-SET
TEMPERATURE
FOR THE
HEATING SYSTEM