Description; Delivery And Unpacking; Operating Principle - PRITY PLW11 Technical Description And Operation Instructions

1. DESCRIPTION

Prity pellet stoves are designed to meet your requirements for comfort and uniform
heating of your home.
They function as a solid fuel using appliance, connected to a dedicated chimney for disposal
of flue gases.
Connection to the chimney and to the Water Heating System (WHS) installed of the
capacity installed corresponding to the heat loss of the respective residence shall be
performed by licensed specialists and capable for tort liability people in charge upon
observation of all local, national and European standards for provision of safety, functionality,
convenience and aesthetics.
Unlike the ordinary solid fuel appliances, pellet stoves can work in a continuous automatic
mode of fuel supply, which is the reason when choosing the model not to resort to higher
capacity stove to cover potential heat losses due to dying down combustion process.
Sometimes during the start-up a customized setting of the proportion of the fuel and
oxygen demand is necessary and it depends on the pellets' quality, chimney draught and the
access to air.

1.1. Delivery and unpacking

The pellet stove is shipped by the manufacturer installed onto a wooden pallet, packed
with stretch wrap and wooden structure. Upon purchase, please, inspect the product exterior
for any visible damage due to transportation. Verify the integrity of the panoramic glass, door
seals and its proper closing with the door handle.
All pellet appliances "Prity" have been tested and set-up under laboratory conditions,
which is the reason for any potential presence of traces of combustion process and pellets.
The firebox will contain:

1.2. Operating principle

Using the dosing device comprising gear motor and auger pellets from the hopper are
loaded via the chute into the firepot, made of heat-resistant alloy steel, where they are
burned in a quantity specified by a recipe, corresponding to the heating capacity selected.
Upon start-up, the initially loaded pellets are warmed and kindled automatically using hot
air from the electrical heating coil – igniter, which upon detection of a stable combustion
process is automatically switched off.
The flue gas fan sucks in the required amount of air for a quality combustion process
through the heat exchangers and the firepot openings. The actual amount of air passing is
continuously measured by a flow meter.
PRITY PELLET STOVE
- supply cable ...............................
- firepot .......................................
- ash pan .............................................
- control module (display) .........
- adjustable feet .......................
- operation manual........
- warranty card ............................
1 pcs.
1 pcs.
1 pcs.
1 pcs.
4 pcs.
1 pcs.
1 pcs.
- 27 -