Embraer EMB145 Operation Manual page 1314

EICAS
MESSAGE
ATA
or
CONDITION
M Flag on
34
the ISIS
MAINT
34 Indication
on the ISIS
TEMPORARY REVISION 41.1
AIRPLANE
OPERATIONS
MANUAL
LOCATION
(1) On the circuit breaker panel, open
and close the INTEG STBY circuit
breaker.
NOTE: Before turning on the
ISIS, make sure that there is no
dynamic pressure applied to
Pitot/Static 3. It must be
equivalent to an airspeed equal to
ISIS
or greater than 60 knots.
The airplane must be maintained
stationary during the ISIS
initialization.
(2) The display shows an initialization
page for 90 seconds.
(3) Wait until the ISIS completes its
initialization.
(1) On the circuit breaker panel, open
and close the INTEG STBY circuit
breaker.
NOTE: Before turning on the
ISIS, make sure that there is no
dynamic pressure applied to
Pitot/Static 3. It must be
equivalent to an airspeed equal to
ISIS
or greater than 60 knots.
The airplane must be maintained
stationary during the ISIS
initialization.
(2) The display shows an initialization
page for 90 seconds.
(3) Wait until the ISIS completes its
initialization.
Copyright © by Embraer. Refer to cover page for details.
GROUND SERVICING
PROCEDURE
1-12-60
Page Code
13 01