Table of Contents
Advertisement
Installation After Delivery
For more information on installing your grill and accessories, see
the grill and carts owner's manual.
If your barbecue island has two or more pieces, the delivery
crew will mate pieces and bolt them together. When sections are
aligned and in place, the crew will apply grout and do whatever
else is necessary cosmetically to ensure the barbecue island is
attractive and presentable.
After your barbecue island is delivered, set in place, and the grill
is mounted, you will need to connect all of the services to your
hardware. If your dealer is not a certified contractor, you will need
to hire a contractor for this.
The natural gas line connects to the grill inside the island. As you
are facing the grill, the connection is located at the right rear side
of the grill. The stub-up will terminate with a valve and a ½" male
fitting. Connect the flexible tubing from the grill to the male fitting.
Both the natural gas and the electrical service connect inside
where the grill outlet is located.
The voltage transformer can be mounted to any part of the frame
where it will not be in the way. Plug it into the 110V grounded
outlet located inside the barbecue island.
Side burners do not require a separate regulator. You can put in
a tee in the line after it comes out of the regulator. For detailed
installation instructions, see the grill and cart owner's manual.
8
Advertisement
Table of Contents
