Table of Contents
Advertisement
Split/Lap Function
[Prefs]
Use the
[S/Lap]
the
tion or a lap function.
If the "S/LP" preference is set to "
total time elapsed from the start of the
timer to the moment the
pressed displays.
If set to "
presses displays. For example, the first
press of
elapsed from the timer's start point to the
[S/Lap]
time
press of
display. A third press displays the time
elapsed between the first and third
presses. The fourth press continues the
time display. The fifth press shows the
time elapsed between the third and fifth
press and so on.
Even though the timer display is
stopped, the timer continues to count.
Therefore, if the second press occurred
at 30 seconds, the display at the fourth
press will show the cumulative value of
30 plus the time passed between the
third and fourth presses.
Note: Every time the [S/Lap] key is
pressed, the time elapsed is stored as a
value in the paperless tape.
key to determine whether
key acts like a split func-
Lap
," the time elapsed be-tween
[S/Lap]
is pressed. The second
[S/Lap]
[S/Lap]
displays the time
continues the time
User's Guide – 39
Split,
" the
key is
Advertisement
Table of Contents
