Setting Film Speed [Fps] - Calculated Industries Frame Master II User Manual

Setting Film Speed — [fps]
The default value for film speed is 24
frames per second. This key sets the fps
used by the [16mm], [35mm] and
[Cust] keys. To set a new value:
(1) Clear the calculator and select dec-
imal mode.
(2) Enter the number of frames per sec-
ond you want to set.
(3) Press [Stor] [fps] to save this value
as the new fps setting.
(4) Press [Rcl] [fps] to verify your entry.
Example: Setting 30 fps Film Speed
Enter and store 30 fps.
Steps
Clear calculator
Enter value
Store as fps
Verify entry
[On/C] [On/C] [Dec]
[Stor] [fps] — 25
[Rcl] [fps] — 25
Keystrokes
[On/C] [On/C]
[Dec] 30
[Stor] [fps]
[Rcl] [fps]
25.
Display
FPS
FPS
User's Guide – 37
0.
30.
30.
30.