Attention For Operation - Contec CMS 50IW Manual

When charging in power-off state, short press power button and
the device will display green dynamic state bar.It means that the
device is charging.When the state bar is full,the charging is finished.
When charging in power-on state,dynamic Power indication symbol
displays. It means that the device is charging.When the state bar is
full,the charging is finished.
If the alarm function is on, the device will provide high-priority
alarm signal when the battery is in low power status .Intermittent
alarm sound will occur.
High priority indicating requires that operator responds immediately.
6.1.7 Uploading the saved Data
Connect the device to computer with data line, then open the PC
software.Please refer to <SpO
operation method of uploading data.The software symbol is as Figure 9.
The computer the device is connected to should accord to the standard
of IEC60950,and the system which is composed with the device accord
with the requirements of IEC60601-1-1.
Figure 9 Software Symbol

6.2 Attention for operation

A.Please check the device before using, and confirm that it can work
normally.
Assistant user manual> for detailed
2
17