Fractional Settings - Calculated Industries Construction Master IV User Manual

Fractional Settings

Setting Fractional Accuracy
When your calculator is in a default
condition (battery change or full reset),
it is set to round fractional values to the
nearest 1/16th of an inch. The
fractional level can be revised by using
the following keystrokes:
[Conv] 1 = Accuracy set to 1/16
[Conv] 2 = Accuracy set to 1/2
[Conv] 3 = Accuracy set to 1/32
[Conv] 4 = Accuracy set to 1/4
[Conv] 6 = Accuracy set to 1/64
[Conv] 8 = Accuracy set to 1/8
A star (
of the display when the calculator is
turned on, if the setting is different from
the default. The fractional setting can
be displayed at any time by pressing
[Rcl] [ / ].
) will appear in the bottom left
User's Guide — 13