Fractional Settings - Calculated Industries MEASURE MASTER CLASSIC 4015 User Manual

Fractional Settings

When you first receive your calculator it is
set to its default state. When in this state,
fractional values are rounded to the nearest
1/16 of an inch. However, you may program
your preference for six different accuracy
levels and two different modes (Normal and
Fixed), all of which remain in permanent
memory until revised or reset.
The fractional level can be revised by
using the keystrokes below:
Keystroke
[Conv] 1
[Conv] 2
[Conv] 3
[Conv] 4
[Conv] 6
[Conv] 8
Note: Whenever the calculator is set to
anything other than 1⁄16 normal mode, a
star ( ) will appear in the bottom left of the
display during power up to indicate a spe-
cial fractional setting has been stored with-
in. The fractional setting can be displayed
at any time by pressing [Rcl] [/].
Fraction Setting
1⁄ 16
1⁄ 2
1⁄ 32
1⁄ 4
1⁄ 64
1⁄ 8
User's Guide – 15