Fractional Settings
When you first receive your calculator
it is set to its default state. When in this
state, fractional values are rounded to
the nearest 1/16 of an inch. However,
you may program your preference for
six different accuracy levels and two
different modes (Normal and Fixed), all
of which remain in permanent memo-
ry until revised or reset.
The fractional level can be revised by
using the keystrokes below:
Keystroke
[Conv] 1
[Conv] 2
[Conv] 3
[Conv] 4
[Conv] 6
[Conv] 8
Note: Whenever the calculator is set to any-
thing other than 1/16 normal mode, a star
( ★ ) will appear in the bottom left of the dis-
play during power up to indicate a special
fractional setting has been stored within.
The fractional setting can be displayed at
any time by pressing [Rcl] [ / ] .
Fraction Setting
1/16
1/2
1/32
1/4
1/64
1/8
User's Guide – 15