Calculated Industries Construction Master 5 Reference Manual page 13

Ç √
√
Ç •
Ç 0
Ç 5
P
x 2 — Squares the value in
the display.
Square Root Key — Used
to find the Square Root of a
non-dimensional or area
value.
Total Cost — Based on
entry of per unit cost.
Store Weight per Volume
— Stores a new Weight per
Volume value as listed
below:
Note: After entering a value
and pressing Ç 0 , continue
pressing the 0 digit key until
you've reached the desired
Weight per Volume format. To
recall your setting, press ® 0 .
• Ton Per CU YD
• LB Per CU YD
• LB Per CU FEET
• MET Ton Per CU M
• kG Per CU M
This value is stored until
you change it or perform a
Clear All (Ç x).
On-Center Spacing (o.c.)
— Stores a new on-center
spacing (e.g., 2 4 i
Ç 5). The value is used
for jack and rake wall stud
calculations. Default is 16".
R
OCKET EFERENCE
G — 9
UIDE