Applent Instruments Anbai AT45 Series User Manual
  1. Manuals
  2. Brands
  3. Applent Instruments Manuals
  4. Measuring Instruments
  5. Anbai AT45 Series
  6. User manual

Applent Instruments Anbai AT45 Series User Manual

Multi-channel temperature meter
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
! $Instruments
Applent Instruments Inc.
Baolong International FL3,Chahua Road,
Zhonglou district ,Changzhou City, Jiangsu
Province, China [213014]
Tel: 0519-88805550 Fax: 0519-86922220
http://www.applent.com
Sales Email:
sales@applent.com
Tech Email:
tech@applent.com
©2005-2017 Applent Instruments, Inc.
English
Rev.B5
[
AT45xx
Multi-channel Temperature Meter
User's Guide
]

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Anbai AT45 Series and is the answer not in the manual?

Questions and answers

Related Manuals for Applent Instruments Anbai AT45 Series

Summary of Contents for Applent Instruments Anbai AT45 Series

  • Page 1 ! $Instruments Applent Instruments Inc. Baolong International FL3,Chahua Road, Zhonglou district ,Changzhou City, Jiangsu Province, China [213014] Tel: 0519-88805550 Fax: 0519-86922220 http://www.applent.com Sales Email: sales@applent.com Tech Email: tech@applent.com ©2005-2017 Applent Instruments, Inc. English Rev.B5 AT45xx Multi-channel Temperature Meter User’s Guide...

  • Page 2: Safety Summary

    Failure to comply with these precautions or with specific WARNINGS elsewhere in this manual may impair the protection provided by the equipment. In addition it violates safety standards of design, manufacture, and intended use of the instrument. The Applent Instruments assumes no liability for the customer's failure to Disclaimer comply with these requirements.

  • Page 3: Certifiaction, Limited & Limitation Of Liability

    Unpacking and Inspection CERTIFIACTION, LIMITED & LIMITATION OF LIABILITY Applent Instruments, Inc. （shortened form Applent）certifies that this product met its published specifications at the time of shipment from the factory. Applent further certifies that its calibration measurements are traceable to the People’s Republic of China National Institute of Standards and Technology, to the extent allowed by the...

  • Page 4: Table Of Contents

    AT45xx User's Guide Contents Safety Summary ................................2 CERTIFIACTION, LIMITED & LIMITATION OF LIABILITY ..................... 3 Contents ................................... 4 Unpacking and Inspection ..........................6 Packing List ................................6 Power Supply ................................ 6 Operation Environment ............................6 Cleaning ................................6 Instrument Handle .............................. 6 Overview ................................
  • Page 5 Unpacking and Inspection To Select Baud Rate ............................25 SCPI Language..............................25 Command Reference ............................26 Terminator ................................. 26 Notation Conventions and Definitions ....................... 26 Command Structure ............................26 Header and Parameters ............................. 27 Command Reference ............................28 9.5.1 MEAS SUBSYSTEM ............................28 9.5.2 SYST SUBSYSTEM ............................

  • Page 6: Unpacking And Inspection

    AT45xx User's Guide Unpacking and Inspection This chapter provides the following information:  Packing List  Power Supply  Operation Environment  Cleaning  Instrument Handle 1.1 Packing List After you receive the instrument, carry out checks during unpacking according to the following procedure. Check that the packing box or shock-absorbing material used to package the instrument has not been damaged.
  • Page 7 Unpacking and Inspection Figure 1‑1 The instrument handle (schematics, panel graphics and is not) View 1: Position of a both hands holding the handles on both sides , gently pill to the sides until you can rotate freely ,and the switch to the View 2 ...

  • Page 8: Overview

    AT45xx User's Guide Overview This chapter provides the following information:  Overview  Main Specification  Main Function 2.1 Introduction Thank you for purchasing AT45xx Multi-channel Temperature Meter The Applent AT45xx adopts high-performance ARM microprocessor control, collects multi-channel temperature data simultaneously.

  • Page 9: Startup

    Startup Startup This chapter provides the following information:  A tour of front and back panel  Connection of the thermocouple 3.1 A tour of front and back panel Figure 3‑1 Front panel description Description USB Disk Port (USB-Host) Power Switch System Key (Include File, System and Key Lock) Soft Key Menu key...

  • Page 10: Connection Of The Thermocouple

    AT45xx User's Guide Figure 3‑2 Back panel description Description 1 # connection port 2 # connection port 3 # connection port 4 # connection port RS485 expansion interface RS232 interface Power outlet and fuse box 3.2 Connection of the thermocouple Figure 3‑3 Thermocouple Terminals PIN 1...
  • Page 11 Startup PIN 13 Channel 7, positive pole of the thermocouple PIN 14 Channel 7, negative pole of the thermocouple PIN 15 Channel 8, positive pole of the thermocouple PIN 16 Channel 8, negative pole of the thermocouple Channel segregation between voltage of 350 v dc, ac 230 v...

  • Page 12: Meas] Page

    AT45xx User's Guide [Meas] Page This chapter provides the following information:  <Measure Display> Page  <GRAPH> Page  <CHAN SETUP> Page 4.1 <MEASURE DISPLAY> Page When press the [Meas] key, the <MEAS DISPLAY> page appears. <MEASURE DISPLAY> page mainly highlights the measurement results, and current sorting results will be displayed in different font and color.

  • Page 13: Channel[001]

    [Meas] Page Font 6x9 Display Page:  According Buttom key "start" to start data collection, according "stop" termination of data collection. 4.1.1 Channel[001]  Steps to close or open the channel Step 1 Press shortcut [Meas] to enter < MEASURE DISPLAY > page Step 2 Use the cursor keys to select [001] field Step 3...

  • Page 14: Graph> Page

    AT45xx User's Guide 4.2 <GRAPH> Page Press[Meas] key and then side soft key [GRAPH] to enter <GRAPH> page <GRAPH> page mainly highlights the graph of the measurement results. Figure 4‑2 <GRAPH> Page Soft Keys Function ↑ Graph move up ↓ Graph move down ←...

  • Page 15: Low] Setting

    [Meas] Page TC-K Setting the thermocouple K type TC-T Setting the thermocouple T type TC-J Setting the thermocouple J type TC-N Setting the thermocouple N type TC-E Setting the thermocouple E type TC-S Setting the thermocouple S type TC-R Setting the thermocouple R type TC-B Setting the thermocouple B type ONEKEY SET...

  • Page 16: Setup] Page

    AT45xx User's Guide [Setup] Page This chapter provides the following information：  <SETUP> Page  <CHAN SET> (refer to < MEASURE DISPLAY>)  <GUEST CAL> Page 5.1 <Setup> Page At any time, press [Setup] key to enter <Setup> page <Setup> page can complete all settings concerned with the measurement, measurement and sorting results will not displayed and the instrument is in waiting state.

  • Page 17: Beep] Setting

    [Setup] Page SLOW Set the sampling rate 1s Set the sampling rate 0.5s Set the sampling rate 0.1s, Increase the length of each 8 cycle by FAST 0.1s to 0.5s 5.1.3 [BEEP] Setting Beep Feature includes: OFF and ON  Steps to set beep feature Step 1 Press [Setup] key to enter <...

  • Page 18: Split] Setting

    AT45xx User's Guide  Steps to set the prefix Step 1 Press Shortcut[Setup] to enter <SETUP> page Step 2 Use the cursor keys to select[AUTO]field Create a new file prefix. Example: the input file named "Applent", the actual file Step 3 called "Applent0001.
  • Page 19 [Setup] Page 5.2.1 [001]  Steps to correct channel 001 Step 1 Press [Setup] key to enter <SETUP> page Step 2 Press [GUEST CAL] soft key to enter <GUEST CAL> page Step 3 Use cursor keys to select [0.0] field Step 4 Use soft key to select Step 5...

  • Page 20: System Configuration

    AT45xx User's Guide System Configuration This chapter provides the following information:  <SYSTEM CONFIG> Page  <SYSTEM INFORMATION> Page  <SERVICE> Page 6.1 <SYSTEM CONFIG> Page In any place, just press shortcut [Setup] and select taskbar key [SYSTEM] to enter <SYSTEM CONFIG> page <System Configuration>...

  • Page 21: Account] Setting

    System Configuration  Steps to setup time Step 1 Press [Setup] key Step 2 Select bottom soft key [SYSTEM], enter <SYSTEM CONFIG> page Step 3 Use cursor key to select [TIME] field Step 4 Use soft key to set time Soft Key Function HOUR INCR+...

  • Page 22: System Information> Page

    AT45xx User's Guide 6.2 <SYSTEM INFORMATION> Page When press the [Setup] key followed by [SYSTEM] bottom soft key, and then press [SYSTEM INFO] soft key, the <SYSTEM INFO> page appears. There are no configurable options in the <SYSTEM INFO> page. Figure 6‑2 System Information Page 6.3 <SYSTEM SERVICE>...

  • Page 23: Catalog Operation

    Catalog Operation Catalog Operation This chapter provides the following information  <Catalog> Page 7.1 < CATALOG > Page When press the [Setup] key followed by [CATALOG] bottom soft key, the <CATALOG> page appears. Some system settings will be saved into this file. The file will be loaded at power up. <CATALOG>...

  • Page 24: Remote Control

    AT45xx User's Guide Remote Control This chapter provides the following information to remotely control the AT45xx via the RS-232C or USB interface.This chapter provides the following information  About RS-232C  About USB Interface  Select Baud Rate.  About SCPI 8.1 About RS-232C You can connect a controller (i.e.

  • Page 25: To Select Baud Rate

    Remote Control 8.3 To Select Baud Rate Before you can control the AT45xx by issuing RS-232 commands from built-in RS-232 controller connected via its DB-9 connector, you have to configure the RS-232 baud rate. The AT45xx’s built-in RS-232 interface uses the SCPI language. The configuration of RS-232 RS-232 configuration is as follows: Data bits: 8-bit...

  • Page 26: Command Reference

    AT45xx User's Guide Command Reference This chapter contains reference information on programming AT45xx with the SCPI commands.  Terminator  Notation Conventions and Definitions  Header and Parameters  Command Reference This chapter provides descriptions of all the AT45xx's available RS-232 commands which correspond to Standard Commands for Programmable Instruments (SCPI) command sets, listed in functional subsystem order.

  • Page 27: Header And Parameters

    Command Reference  Letter case (upper and lower) is ignored. For example, ROOT:COMMAND3 = root:command3  Spaces (_ used to indicate a space) must not be placed before and/or after the colon (:). For example,   root_:_command3  root:command3 ...

  • Page 28: Command Reference

    AT45xx User's Guide 1E-9 (NANO) 1E-12 (PICO) 1E-15 (PEMTO) 1E-18 (ATTO) 9.5 Command Reference All commands in this reference are fully explained and listed in the following functional command order.  MEAS Subsystem  SYST Subsystem  FETCH Subsystem  ERROR Subsystem ...
  • Page 29 Command Reference <on,off><NL> Query Response Example SEND> MEAS:KEYLOCK?<NL> RET> on<NL> 9.5.1.4 MEAS:START The :START command sets the sample. Command Syntax MEAS:START <on,off> Example SEND> MEAS:START off<NL> //Set to start sample Query Syntax MEAS:START? <on,off><NL> Query Response Example SEND> MEAS:START?<NL> RET> on<NL>...

  • Page 30: Syst Subsystem

    AT45xx User's Guide 9.5.1.9 MEAS:HIGH The :HIGH command sets the high value of all channel. MEAS:HIGH <float> Command Syntax Example SEND> MEAS:HIGH <1800.0> //Set the all channel high limit 1800.0 MEAS:HIGH? Query Syntax < float,float > Query Response SEND> MEAS:HIGH?<NL> Example RET>...

  • Page 31: Fetch Subsystem

    Command Reference Example SEND> SYST:beep on <NL> //Set to open beep Query Syntax MEAS:beep? <on,off><NL> Query Response Example SEND> SYST:beep?<NL> RET> on<NL> 9.5.2.3 SYST:UNIT The :UNIT command sets the unit feature. Command Syntax MEAS:UNIt <cel,kel,fah> Parameter <cel,kel,fah> cel: Degrees Celsius kel: Degrees Kelvin fah: Fahrenheit Example SEND>...

  • Page 32: Rs485 Connect

    AT45xx User's Guide 10. RS485 Connect This chapter contains reference information on programming AT45xx with the RS485 connect. RS485 connect  10.1 RS485 Connect You can use a dedicated communication cable to connect an external ATL104 acquisition board , bringing the total to 128 channel expansion . To either end of ATL104 communication cable connector into CASCADING Interface Insert ATL104 communication cable into BUS<1>...

  • Page 33: Accuracy

    Accuracy 11. Accuracy This chapter provides the following information:  Accuracy 11.1 Accuracy Instrument Accuracy does not include the standard contact compenstation Precision. Model Range（℃） Accuracy（℃） -150℃ to 0℃ ±1.0℃ 0℃ to 400℃ ±0.8℃ -100℃ to 0℃ ±1.2℃ 0℃ to 1350℃ ±0.8℃...

  • Page 34: Specification

    AT45xx User's Guide 12. Specification This chapter provides the following information:  General Specification  Specifications  Dimension 12.1 General Specification The Data is Achieved under the Following Conditions:  Temperature: 23℃± 5℃ Humidity: 65% R.H.   Warm-up Time: > 60 minutes ...

  • Page 35: Specifications

    3.5 inches, true color 16M, TFT-LCD display  Comparator (Sorting) Function.  Keypad Lock Function  Language: English and Chinese  Build-in RS485 expansion interface  Build-in RS232 interface  Compatible SCPI Instruction Set 12.3 Dimension Applent Instruments AT45xx User’s Manual English Edition...

Table of Contents