Data Report - netvox R718CK2 User Manual

5. Data Report

The device will immediately send a version package report and a report data with temperature and voltage values.
The device sends data in the default configuration before any configuration is done.
Default setting:
Maximum time: Max Interval = 900 seconds
Minimum time: Min Interval = 900 seconds
(by default, the current voltage value is detected per Min Interval)
Battery Change: 0x01 (0.1V)
Temperature Change: 0x00064 (10°C)
Note:
(1) The real data sending cycle will be programmed before shipment.
(2) The interval between two reports must be the minimum time
Please refer Netvox LoRaWAN Application Command document and Netvox Lora Command Resolver
http://loraresolver.netvoxcloud.com:8888/page/index
Data report configuration and sending period are as following:
Min Interval
(Unit:second)
Any number between
1~65535
Max Interval
(Unit:second)
Any number between
1~65535
to resolve uplink data.
Reportable Change
Can not be 0.
5
Current Change≥
Reportable Change
Report
per Min Interval
Current Change＜
Reportable Change
Report
per Max Interval