Data Report; Example Of Reportdatacmd - netvox R718CN2 User Manual

5. Data Report

The device will immediately send a version package report and a report data with temperature and voltage values.
The device sends data in the default configuration before any configuration is done.
Default setting:
Max Interval: 0x0384 (900s)
Min Interval: 0x0384 (900s)
Battery Change: 0x01 (0.1V)
Temperature Change: 0x00064 (10°C)
Note:
(1) The real data sending cycle will be programmed before shipment.
(2) The interval between two reports must be the minimum time
Please refer Netvox LoRaWAN Application Command document and Netvox Lora Command Resolver
http://cmddoc.netvoxcloud.com/cmddoc
Data report configuration and sending period are as following:
Min Interval
(Unit:second)
Any number between
1~65535

5.1 Example of ReportDataCmd

FPort：0x06
Bytes
Version
Version– 1 byte –0x01——the Version of NetvoxLoRaWAN Application Command Version
DeviceType– 1 byte – Device Type of Device
The devicetype is listed in Netvox LoRaWAN Application Devicetype doc
ReportType – 1 byte –the presentation of the NetvoxPayLoadData，according the devicetype
NetvoxPayLoadData– Fixed bytes (Fixed =8bytes)
to resolve uplink data.
Max Interval
(Unit:second)
Any number between
1~65535
1 1
DeviceType
Reportable Change
Can not be 0.
1
ReportType
5
Current Change≥
Reportable Change
Report
per Min Interval
Var (Fix=8 Bytes)
NetvoxPayLoadData
Current Change＜
Reportable Change
Report
per Max Interval