Microwave Oven Installation - Proline SM202 Manual

MICROWAVE OVEN INSTALLATION

Preparation
Remove all packing material and accessories. Examine the oven for any damage
such as dents or broken door. Do not install the microwave oven if it is damaged.
Cabinet: Remove any protective film found on the microwave oven cabinet
surface
Do not remove the light brown Mica cover that is attached to the inside of
the oven cavity to protect the magnetron.
Position
• Select a level surface that provides enough open space for the intake and/
or outlet vents.
• The microwave oven must be placed on a surface with height more than 85
cm above the floor.
• A minimum clearance of 20 cm is required on both sides of the oven.
• The minimum height of free space above the top surface of the oven is 30
cm.
• Do not remove the feet from the bottom of the oven.
• Blocking the intake and/or outlet openings can damage the oven.
• Place the oven as far away from radios and TV as possible.
• Operation of microwave oven may cause interference to your radio or TV
reception.
• Plug your oven into a standard grounded outlet. Be sure the voltage and
the frequency are the same as the voltage and the frequency on the rating
label.
• WARNING: Do not install the oven over a range cooktop or other heat-
producing appliance. If installed near or over a heat source, the oven could
be damaged and the warranty would be void.
44