Lamp Replacement; Maintenance And Cleaning; Fan Oven; Cleaning The Glass Oven Door - Proline PSO60FW Installation And Operating Instrictions

26302-020306.qxp

MAINTENANCE AND CLEANING

GRILL
MAINTENANCE AND CLEANING
1. Before cleaning it you should wait until the oven cools down.
2. Do not steam pressure clean the oven.
1. Before cleaning it you should wait until the oven cools down.
MAINTENANCE AND CLEANING
3. It is best to clean the bottom of the oven after every use and not allow the remains of food
2. Do not steam pressure clean the oven.
and spots of oil to remain burned on. 3. It is best to clean the bottom of the oven after every use and not allow the remains of food
1. Before cleaning it you should wait until the oven cools down.
and spots of oil to remain burned on.
Do not use caustic paste, abrasive wire, powders or hard instruments to clean surfaces.
2. Do not steam pressure clean the oven.
Do not use caustic paste, abrasive wire, powders or hard instruments to clean surfaces.
All parts and surfaces can be safely cleaned in warm soapy water and left to dry before
3. It is best to clean the bottom of the oven after every use and not allow the remains of food
reassembling. Wait for the oven to cool before cleaning to avoid risk of skin burns.
All parts and surfaces can be safely cleaned in warm soapy water and left to dry before
and spots of oil to remain burned on.
reassembling. Wait for the oven to cool before cleaning to avoid risk of skin burns.
For stubborn marks on glass surfaces a mild cream cleaner can be used. Dry parts with a
Do not use caustic paste, abrasive wire, powders or hard instruments to clean surfaces.
soft cloth. On painted surfaces only use a clean cloth wrung out in hot soapy water.
For stubborn marks on glass surfaces a mild cream cleaner can be used. Dry parts with a
All parts and surfaces can be safely cleaned in warm soapy water and left to dry before
soft cloth. On painted surfaces only use a clean cloth wrung out in hot soapy water.
For vitreous enamel surfaces use a mild cream cleaner specially approved for these
reassembling. Wait for the oven to cool before cleaning to avoid risk of skin burns.
surfaces.
For vitreous enamel surfaces use a mild cream cleaner specially approved for these
For stubborn marks on glass surfaces a mild cream cleaner can be used. Dry parts with a
surfaces.
For stainless steel surfaces clean using an appropriate product and always dry thoroughly.
soft cloth. On painted surfaces only use a clean cloth wrung out in hot soapy water.
CLEANING GLASS DOOR
For vitreous enamel surfaces use a mild cream cleaner specially approved for these
IMPORTANT: These parts must be cleaned very carefully to avoid scratching and abrasion.
surfaces.
CLEANING GLASS DOOR
You are advised to use a soft cloth and neutral soap.

Cleaning the glass oven door

Open the door.
CLEANING GLASS DOOR
Move the shelf to the first or second
position from the top.
Ensure the oven door is cool before cleaning. Removal of the
door makes it easier to clean the door, the door surround and
the seals.
Select the symbol
selector.
To remove the door proceed as follows:
1. Open the door fully.
2. Raise one hinge clip and rotate it towards you as far as the
Turn the thermostat control between 50°C
stop (Figure 20). Repeat the procedure with the second
and MAX and preheat the element for five
hinge clip on the other side of the door.
minutes.
3. Raise the door gently until it comes to rest against the hinge
clips.
SIDE
Place the food in the middle of the grill pan 4. Grip the edges of the door and lift the door clear of the
FRAME SCREW
SIDE
catches in the hinge openings.
and position the pan so the food is near
FRAME SCREW
5. When cleaning the door, take care not to move the clips from their position.
but not touching the top element. Do not
SIDE
Ensure the oven door is cold before cleaning. Release the two screws securing the top
line the grill pan with aluminium foil. Use
6. Once cleaning is complete, lift the door and slide the hinges into the hinge openings.
FRAME SCREW
frame. Remove the top frame and slide out the glass.
Ensure the oven door is cold before cleaning. Release the two screws securing the top
the handle when handling the grill pan
7. Engage the slots on the hinges with the catches in the hinge openings.
frame. Remove the top frame and slide out the glass.
(Fig. 5).
8. Check that the weight of the door is fully supported on the hinges.
To replace the glass, place bottom edge of the glass in the clips. Carefully lay the glass on
Ensure the oven door is cold before cleaning. Release the two screws securing the top
9. Lower the door and raise the hinge clips, then return them away from you and back to their starting
the buffers so it rests flush with the side frame. Replace the top frame and secure with the
To replace the glass, place bottom edge of the glass in the clips. Carefully lay the glass on
frame. Remove the top frame and slide out the glass.
positions.
two screws.
the buffers so it rests flush with the side frame. Replace the top frame and secure with the
10. Check that the seal is in place then close the door. Make sure that the inner face of the door meets and
When the food is cooked turn the grill To replace the glass, place bottom edge of the glass in the clips. Carefully lay the glass on
two screws.
shuts against the seal all around.
control to off (�).
the buffers so it rests flush with the side frame. Replace the top frame and secure with the

LAMP REPLACEMENT

two screws.
LAMP REPLACEMENT
Wait for the oven to cool.

Changing the oven lamp

LAMP REPLACEMENT
Wait for the oven to cool.
Unscrew and remove the diffuser. Unscrew
the lamp from the lampholder. Replace Wait for the oven to cool.
Unscrew and remove the diffuser. Unscrew
Wait for the oven to cool.
lamp and diffuser (Figure. 7).
the lamp from the lampholder. Replace
Unscrew and remove the diffuser. Unscrew
Unscrew and remove the diffuser. Unscrew the lamp from the lampholder. Replace lamp and diffuser
lamp and diffuser (Figure. 7).
the lamp from the lampholder. Replace
(Figure 20).
The replacement lamp must be of the
lamp and diffuser (Figure. 7).
same type, voltage and wattage (15W SES
The replacement lamp must be of the
The replacement lamp must be of the same type, voltage and wattage (15W SES 300°C).
300°C).
same type, voltage and wattage (15W SES
The replacement lamp must be of the
300°C).
same type, voltage and wattage (15W SES
300°C).
13/04/2006 09:50
Figure 2
CLIP
CLIP
CLIP
on the control
Page 5

FAN OVEN

General cooking
GLASS
Turn the control selector to
GLASS
uses a circular element to quickly and
SIDE FRAME
efficiently heat the oven. As the fan is very
HINGE CLIP
GLASS
efficient at distributing heat, the oven is
more uniformly heated so cooking times
SIDE FRAME
may be shortened.
STOP
Select the temperature on the thermostat
control between 50°C and MAX.
The thermostat indicator light goes out
when the oven is at the correct
temperature.
Figure 6
Figure 6
For efficient and economic cooking, keep
the oven door closed as much as possible.
Figure 6
Defrosting setting
Turn the control selector to
the thermostat control at �. The fan turns
on with no heat.
This allows frozen food to rapidly defrost.
DIFFUSER
DIFFUSER
GRILL
PAN
DIFFUSER
Figure 5
5 5
4
5
Figure 3
SIDE FRAME
BUFFER
BUFFER
SCREW
BUFFER
SCREW
SCREW
TOP
FRAME
TOP
Figure 20 - removing the oven door
FRAME
TOP
FRAME
LAMP
LAMPHOLDER
LAMP
LAMPHOLDER
Figure 7
LAMP
Figure 7
LAMPHOLDER
Figure 7
. The oven
HINGE
OPENING
SLOT
CATCH
and keep