Table of Contents
Advertisement
Quick Links
Product Name and Model Number
Thank you for choosing our product. Please read the instructions
carefully before operation. Follow these instructions to ensure that the
product is functioning properly. The images shown in this manual are
for illustrative purposes only.
P a g e
| 1
Installation Guide
ZPad Plus(4G)
Date: December 2020
Doc Version: 1.0
English
For further details, please visit our Company's website
www.zkteco.com.
Copyright©2020 ZKTeco Co., Ltd. All rights reserved.
User Manual
Advertisement
Table of Contents
Related Manuals for ZKTeco ZPad Plus
Summary of Contents for ZKTeco ZPad Plus
- Page 1 Follow these instructions to ensure that the product is functioning properly. The images shown in this manual are for illustrative purposes only. For further details, please visit our Company’s website www.zkteco.com. P a g e Copyright©2020 ZKTeco Co., Ltd. All rights reserved.
- Page 2 ZKTeco supplied product vests in and is the property of ZKTeco. The contents hereof should not be used or shared by the receiver with any third party without express written permission of ZKTeco.
- Page 3 ZPad Plus(4G) Installation Guide ZKTeco in no event shall be liable to the user or any third party for any incidental, consequential, indirect, special, or exemplary damages, including, without limitation, loss of business, loss of profits, business interruption, loss of business information or any pecuniary loss, arising out of, in connection with, or relating to the use of the information contained in or referenced by this manual, even if ZKTeco has been advised of the possibility of such damages.
- Page 4 Installation Guide About the Company ZKTeco is one of the world’s largest manufacturer of RFID and Biometric (Fingerprint, Facial, Finger-vein) readers. Product offerings include Access Control readers and panels, Near & Far-range Facial Recognition Cameras, Elevator/floor access controllers, Turnstiles, License Plate Recognition (LPR) gate controllers, and Consumer products including battery-operated fingerprint and face-reader Door Locks.
- Page 5 The general information which helps in performing the operations faster The information which is significant Care taken to avoid danger or mistakes The statement or event that warns of something or that serves as a cautionary example. P a g e Copyright©2020 ZKTeco Co., Ltd. All rights reserved.
-
Page 6: Table Of Contents
INSTALLATION PROCEDURE ......................11 ......................... 11 EMOVAL OF NSULATION SIM C (GPRS CDMA M ) ................11 NSTALLATION ODELS ....................... 12 OUNT THE DEVICE ON THE WALL ........................... 13 IRING ROCEDURE P a g e Copyright©2020 ZKTeco Co., Ltd. All rights reserved. -
Page 7: Safety Measures
Lightning - External lightning conductors can be installed to protect against electrical storms. It stops power-ups destroying the system. Recommended installing the devices in areas with limited access P a g e Copyright©2020 ZKTeco Co., Ltd. All rights reserved. - Page 8 • The warranty service does not cover accidental damage, damage caused by mis operation, and damage due to independent installation or repair of the product by the user. P a g e Copyright©2020 ZKTeco Co., Ltd. All rights reserved.
-
Page 9: Overview
Installation Guide Overview ZPad Plus(4G) is a Smart Time & Attendance device that offers a variety of time management solutions. This document outlines the installation procedure of ZPad Plus(4G). Please follow the instructions carefully before installation to ensure the proper functioning of the device. -
Page 10: Appearance
ZPad Plus(4G) Installation Guide Appearance Front View Bottom View Left-side View P a g e | 10 Copyright©2020 ZKTeco Co., Ltd. All rights reserved. -
Page 11: Installation Procedure
Insert the SIM card into the slot, as shown in the picture. The SIM card clicks into place. • Place the battery, cover, and screw to its corresponding positions to complete the SIM card installation process. P a g e | 11 Copyright©2020 ZKTeco Co., Ltd. All rights reserved. -
Page 12: Mount The Device On The Wall
Mount the device on the wall Perform the following steps to mount the device on the wall. Fix the ZPad Plus(4G) bracket on the wall using the wall mount screws. The recommended installation height is 1.25 meters. Connect the ZPad Plus(4G) to the bracket. -
Page 13: Wiring Procedure
ZPad Plus(4G) Installation Guide Wiring Procedure Connection with PC through crossover cable and Power Connection 12V/1.5 An Adapter provided with ZPad Plus(4G) Lock Connection • Below is the sample image when the device is not sharing the power with the lock. - Page 14 ZPad Plus(4G) Installation Guide • Below is the sample image when the device is sharing the power with the lock. Exit Button Connection P a g e | 14 Copyright©2020 ZKTeco Co., Ltd. All rights reserved.
- Page 15 ZKTeco Industrial Park, No. 32, Industrial Road, Tangxia Town, Dongguan, China. Phone: +86 769 - 82109991 Fax: +86 755 - 89602394 www.zkteco.com Copyright © 2020 ZKTECO CO., LTD. All Rights Reserved. P a g e | 15 Copyright©2020 ZKTeco Co., Ltd. All rights reserved.
Need help?
Do you have a question about the ZPad Plus and is the answer not in the manual?
Questions and answers