Actions When Error Led Turns On - Mitsubishi Electric PV-PNS04ATL-IT Operation Manual

PV-IB_IT＿英表示-3.3 08.3.6 10:14 ページ74

5.2.2 Actions When Error LED Turns On

The following action should be taken if the ERROR LED is illuminated.
If the procedures illustrated above do not remedy the error (i.e., the
ERROR LED turns on again ), then take the following action.
Display panel
Display panel
Procedure
1. Press the POWER switch for 2
seconds or longer to turn off the
PV inverter.
2. Make sure that "----" is displayed,
and then press the POWER switch
again for 2 seconds or longer to
restart the PV inverter.
Procedure
1. Press the POWER switch for 2
seconds or longer to turn off the
PV inverter.
2. Turn off the DC disconnector.
3. Turn off the AC disconnector.
4. Contact your dealer for repair or
checkup.
74