Mitsubishi Electric PV-PNS04ATL-IT Operation Manual page 92

PV-IB_IT＿英表示-3.3 08.3.6 10:14 ページ91
#
t 0 0
10
Flashing
Display panel
>
OFR f g 0 5 . 0 5H z
. 0 s f p 0 5 . 1 0H z
Procedure
When your PV inverter is up and starts
running in 'OFR', then its built-in relay
for grid turns off with "#" turned on on
the LCD.
・fg: Grid frequency in 'OFR' is dis-
played.
・fp: Stabilizing frequency in 'OFR' is
displayed.
・t: Operating time in 'OFR' is dis-
played.
This completes the AUTO TEST in
'OFR'. Please proceed to step 11
below.
● ● If the AUTO TEST in 'OFR' is aborted,
then '---' is displayed to the right of
't', 'fg' and 'fp' on the LCD. In such a
case, simply move to step 14 below,
in the meantime, to exit the "AUTO
TEST" mode.
91